Results 1 to 2 of 2
09-03-2012, 09:58 AM #1Feedback Score 0
- Join Date
- Jul 2011
Enkei J-Speed III | 16x7 | 1996 Integra Type R Brake Conversion |Diameter: 16 inchesWidth: 7 inchesLug pattern: 4x114.3Offset: +25Condition of tires: Not included
Make: J-Speed III (discontinued, not remade like the current J-Speed's)
PCD: 4x114.3 (Hubcentric 4x100 adapters are around $165 shipped from Adaptec)
Condition: Wheels have some typical nicks and scratch's for their age, but zero bends or cracks. Original valve stems included.
Lugnuts: Will come with a set of BNIB Gorilla small diameter spline drive lugnuts and key-$40 value!
Trades: Other 15" or 16" wheels (NO FAKE WHEELS! No Rota, XXR, MB, etc.), preferably in 4x100.
$1100 shipped OBO
$1000 P/U OBO
Too high? Click here and buy these.
Do you have a Civic or Integra and think, "These are the wrong bolt pattern?" I also have a 1996 Honda Integra Type R brake conversion which will allow you to run these wheels, have approx. 5mm more offset, have rear disc brakes (for you DX guys!), and 10.3" front disc brakes.
$315 P/U (No shipping!)
Do the math! For $1350 you can have VERY rare JDM rims, JDM brakes, BNIB Gorilla lug nuts, and some nice STANCE! Pay to Play!
Contact: Call me at 407-233-9623 or email at Russelllaviolette@yahoo.com or just shoot me a PM! Items located in Central Florida.
Set (tires not included):
Single rim (brake setup not included):
Single rim (tire not included):
Original Inspection Label:
Beautiful Wheel (specific brake setup not included):
15" J-Speed III's on an EG hatch (will remove if owner wishes):
10-22-2012, 12:42 PM #2Feedback Score 0
- Join Date
- Jul 2010
How much with em1 complete 4 lug with steelies....