1989 CRX Si
engine 8-9k miles
asking $5500 OBO
Im selling this car because I can't keep up with it anymore. I have too many other things I'm trying to take care of.
Now on to the car.
Exterior is stock with paint from about 3-4 yrs old
Rust has come out in the Driver rear qtr panel, sunroof panel, and passenger side corner of the trunk lid by the wiper.
Full Polish ROTA 15x7 Slipstreams with 195/50/15 tires Kuhmo Ecstas. tires have 90% thread or more.
lowering springs for which i dont know the brand
ENERYGY SUSPENSION BUSHINGS in every place possible including rack and upper shock bushings as well.
SUSPENSION TECHNIQUES F & R Sway bars with ENERGY SUSPENSION BUSHINGS
WICKED TUNING rear adjustable toe kit and rear camber kit
ebay front camber kit
INNOVATIVE Front Crossmember with ENERGY SUSPENSION bushings
CAR IS ALIGNED AND DRIVES STRAIGHT!!!!!!!
B18C1 bottom bored 0.25 over with NEW BEARINGS, TYPE R pistons
B16 HEAD machined and cleaned as well as bottom with SKUNK2 CAM GEARS, retainers, GSR CAMS
TYPE R Intake Manifold
MAgnaflow Exhaust 2" all the way back with TEST TIPE
INNOVATIVE MOTOR MOUNTS
CHIPPED AND "tuned" P28 CAR makes 180WHP
Hasport Cable to hydro conversion kit
Clutchmasters clutch, pressure plate
light flywheel but dont know which one.
AVID Shift linkag with ENERGY SUSPENSION Bushings
Removable steering wheel (ebay brand and horn works!!)
aftermarket floor mats that say EF
Buddy Club Drivers SEAT with LOW DOWN RAIL thats for a CIVIC or INTEGRA (Its like that because I had to move the car and Idont have seats for it, but that will be the seat you get, you can purchase crx rails to use these seats and sell the low downs
CLIFFORD G770 installed on the car.
89's came with rear drums so I converted it to rear disc brakes
Motor has about 8-9kmiles
The NEW Parts I have I can sell seperately and make the money on them because it sells and most are discontinued. I also think due to the bad body parts on the car, Whoever takes it will have a frsh start with all new seals if decided to repaint the car. Its a great start.
CAR needs a new master cylinder, doesnt have a radio but has pioneer speakers, trouble with idle because I don't have the right bracket/throttle cable and possibly the fact I'm running the wall mounted MAP sensor (which is simple to remove and swap but like I said I don't have time anymore I need this gone)
CALL/TEXT Or PM