Guys, I have contacted an international supplier of modified K-Series ECUs that is suited for anyone doing a budget K-Series Build and can't afford Hondata KPRO.
SwapECU-K is a modified RSX Base Model (PND), Automatic ECU to a RSX Type S, 6 Speed Manual (PRB). It's fully working, it was tested in a RSX-S.
The advantage of this ECU is, that the Immobilizer, the Multiplexer, the secondary O2 Sensor, ELD Sensor are disabled. This makes this ECU a great budget solution for you engine Swap.
The ECU is prepared for KPro. If you want to upgrade to a KPro you just need to cut out the hole for the USB Connector and attach the KProg Board to the ECU. The Pin headers and modification are already pre-installed.
* PND ECU converted to a Type S, 6-Speed Manual
* Reverse Lockup added
* newest Firmware installed: RBA080 (KPro is based on the older RBA060!)
* Immobilizer disabled
* Multiplexer disabled
* Secondary O2 Sensor disabled
* ELD Disabled
* KPro "Plug-n-Play" ready
Price: $330 shipped in USA
If interested PM or call 954.326.8684