Results 1 to 2 of 2
  1. #1
    RelentlessRage8 is offline Feedback Score 0
    Join Date
    Apr 2011

    Default Complete Fully Built Gsr Turn-Key Swap

    Motor was built, broken in, tuned, and now I'm looking into another build.

    P72 GSR Head (port & polished)
    - Skunk 2 Intake Manifold ported ($250)
    - Skunk 2 70mm Throttle Body ($120)
    - Supertech Complete Valve Train: dual valve springs, retainers, valves ($650)
    - Brian Crower Stage 3 N/A Cams ($460)
    - AEM Tru Timing Cam Gears ($200)
    - RC 750cc Injectors ($350)
    - AEM Fuel Rail ($110)
    - AEM Fuel Pressure Regulator ($130)
    - PLM Short Tri-Y Header ($400)
    - Hondata Intake Manifold Gasket ($40)
    - Thermal Throttle Body Gasket ($30)
    - Password JDM Carbon Fiber Intake ($200)
    - AEM Cold Air Intake ($280)

    Roughly $4,000 invested, including the head and machine shop work.
    Asking $2,100 OBO

    B18C1 Block (cleaned, honed, & bored to 82mm)
    - 82mm 11.5:1 wiseco pistons ($500)
    - Eagle H-Beam Rods ($330)
    - Eagle Block Guard ($100)
    - ACL Main & Rod Bearings with Thrust Washers ($120)
    - Gates Racing Timing belt, water pump, tensioner ($180)
    - Honda OEM Oil Pump ($100)
    - MyHondaHabit oil pan gasket and hardware ($80)
    - ARP Head Studs ($120)
    - Cometic Head Gasket ($80)

    Roughly $2,200 invested; including the block, machine shop work, balancing, andmicropolishing crank.
    Asking $1,300 OBO

    B16 Transmission
    - Stage 4 CC Clutch ($400)
    - Lightweight flywheel

    Swap has ALL new Acura/Honda oem gaskets.

    I am willing to sell the complete TURN KEY swap with stock axles, drop engineering solid motor mounts, complete nitrous kit, engine harness, transmission, shift linkage, and p28 ECU (tuned by Turbogixxer, 221/147 all motor, easily 32x/25x with a 100 shot) for $4,000 obo.

    Serious buyers only please. No low ballers please. Local pick up only. CASH ONLY.
    I prefer to sell everything together, I will part out if it is not sold within 2 weeks.
    The motor is still in car.
    I have dyno sheets, videos, and pictures of my entire build to prove the parts that were used for this build.
    240 compression across all 4 cylinders.

    Contact me anytime with questions and offers.
    (305) 804-4542.
    Attached Images Attached Images    
    Last edited by RelentlessRage8; 05-07-2013 at 11:22 PM.
    01 Integra - DD
    95 EG Sedan - Sold
    93 EG Coupe - Sold
    92 EG Hatch - Sold
    89 CRX - Junked

  2. #2
    RelentlessRage8 is offline Feedback Score 0
    Join Date
    Apr 2011


    Bump, willing to take $3,500 obo without nitrous kit.

Tags for this Thread

Quick Navi
sponsored links

About Honda-Classifieds

    Buy, sell, or trade your Honda / Acura parts and vehicles with efficiency and ease for free! We never charge any fees what so ever!

Follow us on

Facebook Twitter